BNVLK - TIONA RCL-3

  • MSDS: BNVLK
  • Manufacturer: SCM CHEMICALS
  • Product Name: TIONA RCL-3
  • National Stock Number: 8010-00N031234
Product Identification

Product ID:TIONA RCL-3
MSDS Date:08/01/1987
FSC:8010
NIIN:00N031234
MSDS Number: BNVLK

Responsible Party
SCM CHEMICALS
7 ST PAUL STREET
BALTIMORE, MD 21202
US

Emergency Phone: 301-783-1120

Info Phone: 301-783-1120; 301-355-3600

Preparer: J.H. BLACKER

Cage: 46343

Contractor
SCM CHEMICALS
BALTIMORE, MD 21202 US

Telephone: 301-783-1120;301-931-4570

Cage: 46343

Ingredients

RUTILE; (TITANIUM DIOXIDE) (LIMITS GIVEN AS TITANIUM OXIDE)

CAS: 1317-80-2

RTECS: VM2940000

Fraction By Weight: 80-97%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SILICA GEL; (AMORPHOUS SILICA)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 10% MAX

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


3); (AS AL*20*3) (EPA LISTS ONLY FIBROUS

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 6% MAX

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

LD50 LC50 Mixture:LD50 (ORAL, RAT):>9000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:INERT NUISANCE DUST. TEMPORARY
DRYING EFFECT OR IRRITATION OF MUCOUS MEMBRANES MAY RESULT FROM
EXCESSIVE EXPOSURE. SKIN:NON-CORROSIVE, NON-IRRITATING,
NON-SENSITIZING, MAY HAVE A DRYING EFFECT O N SKIN. EYE:INERT
FOREIGN BODY HAZARD ONLY. INGEST:HARMLESS, PHYSIOLOGICALLY INERT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:WASH WITH WATER AND MILD SOAP. INHAL:REMOVE TO FRESH AIR.
INGEST:NO TREATMENT REQUIRED. MATERIAL IS COMPLETELY ELIMINATED
THROUGH GI TRACT IN ABOUT 24 HOURS.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:NO FIRE HAZARD. MEDIA SUITABLE FOR SURROUNDING FIRE
.
Fire Fighting Procedures:NONE REQUIRED. USE NIOSH/MSHA APPROVED SCBA
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:USE ANY FEASIBLE MECHANICAL MEANS - BROOM,
BRUSH, SCOOP, VACUUM OR WET ABSOSRBENT MATERIAL, BUT AVOID DUSTING
DURING CLEAN UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST RESPIRATOR IF TLV
IS OR MAY BE EXCEEDED.
Ventilation:LOCAL EXHAUST, IF REQUIRED TO MAINTAIN AIRBORNE
CONCENTRATIONS BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES FOR DUST
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:(10% SLURRY) PH OF WATER SUSPENSION 5.5- 8.5.

Chemical Properties

HCC:V7
Melt/Freeze Pt:M.P/F.P Text:3326F,1830C
Spec Gravity:3.7-4.2(H2O=1)
pH:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE, TASTELESS, ODORLESS POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISP MUST BE I/A/W LOC, STATE & FED REGS . THIS
PROD WHEN SPILLED CAN BE DISP OF INTO SANITARY LANDFILL/INDUSTRIAL
WASTE DISP LANDFILL. PLEASE REVIEW APPROP STATE INDUSTRIAL WASTE
DISP REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.